Home > Printer Error > Printer Error 13.20.00

Printer Error 13.20.00

I have had about a dozen of them and when it is stuck hard I have to remove tray 1 to unstick it. Transcript Het interactieve transcript kan niet worden geladen. Creating your account only takes a few minutes. As a safety precaution wait 30 minutes for the fuser to cool before proceeding. click site

WeergavewachtrijWachtrijWeergavewachtrijWachtrij Alles verwijderenOntkoppelen Laden... then it will say that there is a jam. Flex the arms on the plastic output bin slightly to remove one side of the tray at a time. by unknown on Feb 13, 2007 at 11:50am Add comment Please sign in to comment 0 The spring should hold the flag in the sensor, been too long since I did

Slowly remove the cardboard from the bottom cavity of the printer. thank you! - Anonymous w00t! I verified the kit number that he used, which was the correct kit, so went to the DC Controller board next. by newbie1234 on Dec 12, 2007 at 12:18pm Add comment Please sign in to comment 0 The 13.20 on the 4200 is a common error and the problem most times is

  • Good luck!
  • If it's worth it to you, you may want to just consider having an HP tech come out and take a look.
  • for me...
  • can someone tell me where the sensor is that would flag this error, I'm guessing that it is reporting a false positive or is stuck or broken.Does any one have a
  • The printer is just over two years old but out of any form of warranty.

Learn more You're viewing YouTube in Dutch. Geüpload op 4 mrt. 2010Fixing HP printer paper jam error. by Ai-Ai on Apr 4, 2012 at 4:08am Add comment Please sign in to comment 0 It could be caused by the pickup solenoid starting to go bad. by unknown on Feb 17, 2009 at 5:16pm Add comment Please sign in to comment 0 Cardstock paper trick worked!!

but error message persists. Never been called back on one that I fixed. Depot International Tech Support 6.308 weergaven 1:44 4250 Maintenance Kit - Duur: 7:14. have a peek at these guys Dit beleid geldt voor alle services van Google.

My printer prints 100 page with no problem at all, when I want to print the next 100 pg he gave me a paper jam error 13.06, i remove the paper, I just got one from a hospital client of mine - somehow it managed to work for a few weeks before the 13.20 top cover then rear door happened on boot. by Anonymous on Feb 12, 2007 at 7:30am Add comment Please sign in to comment 0 Removed tray 1 and found sensor, locked in tipped forward position. A.

by unknown on Apr 28, 2010 at 11:08am Add comment Please sign in to comment I'm thinking the fuser latch is broken. http://fixyourownprinter.com/posts/28628 This particular error probably relates to the group of 3 sensors you say you can not get separately which is true since they are all part of major assemblies. Kies je taal. Install the replacement fuser by inserting it and aligning the left side first.

Thinking it had to be a sensor problem I ordered and installed a new paper pickup assembly but the same error still ocurred. get redirected here YOu save me!! It happens but I can honestly say that in all the printers I have worked on, at most 1\% with a 13 error have had a bad sensor. seem to be on the right track based on my investigation--sensor.  Not that it is faulty or dusty but it may be in the wrong position.  Although this YouTube video is

Went away once the correct fuser was installed. If that does not work, tray 1 has to come off and on this printer it is not easy as lots of things have to come off. On its delivery I gave my old printer to my neighbour (LJ4p which gave years of good service) only to discover the error message once I'd turned it on. navigate to this website thing which at the end is working fine how:) The problem i found was in the Fuser unit, the sensor was jammed and the spring, metal coil, was loose, so i

BleepingComputer is being sued by Enigma Software because of a negative review of SpyHunter. i figured it's a sensor or flag or something, but can't find anything out of place. Anyone have a link to the installation manual?

Don't replace: rejuvenate!

It is black in color and snaps into the paper feed roller. BrokenPrinter1 61.349 weergaven 5:35 todd's HP printer class laserjet 4200 and 4300 series. - Duur: 10:05. Thank you!!! Once you have the fuser out, check the fuser's barcode label for the part # and see if the part # matches with your model printer.

Otherwise, let me know if that thread helps you out at all. 1 Poblano OP technoblurb Dec 17, 2013 at 7:52 UTC Thanks A.J. The best way to determine which fuser you have is to pull the fuser out of your printer and check the barcode label on the fuser. Sluiten Ja, nieuwe versie behouden Ongedaan maken Sluiten Deze video is niet beschikbaar. my review here Another has two cut outs.

by unknown on Sep 5, 2008 at 12:26pm Add comment Please sign in to comment 0 Don't know if this is your issue or not, but I thought I would post by AIC Print Guy on Sep 11, 2006 at 11:33am Add comment Please sign in to comment 0 I have this error. by Anonymous on Aug 1, 2007 at 10:43am Add comment Please sign in to comment 0 Could someone please post what the sensors are supposed to look like?