Home > Precor Error > Precor 9.31 Error 42

Precor 9.31 Error 42

Contents

In this case, the Error 42 is a secondary symptom and the issue should be approached as an Error 40. AC input voltage transients. Possible Reason: Bad or intermittent connection in the lift motor controller. Check continuity of the interconnect cable or swap with a known good interconnect cable to verify if cable is bad. check my blog

Or just drag it here! prev next 3 Points Related Questions: 1 Answer PRECOR C956 power switch wont stay on The power switch on Precor treads is also a circuit breaker. The upper PCA is bad. If an Error 42 has occurred, it is important to know the physical position of the lift when the error occurred.  It is possible the lift is physically out of range i thought about this

Precor Treadmill Error Codes

Jan 17, 2016 | Precor C956i Treadmills with HR /... 0 Answers Precor 544 elevation wheels are not aligned Jun 05, 2014 | Precor C956i Treadmills with HR /... 0 Answers It is possible the lift is physically out of range or jammed. A leaky or shorted drive motor inductor (on units equipped with SCR motor controller) could increase the current demand enough to cause the error.

  1. Lift motor is physically jammed and not able to move. 3.
  2. Disconnect the lift motor from the ramp (elliptical) or lift platform (treadmill).
  3. If the Error 42 condition is intermittent, a connection issue is probably the cause.
  4. Treadmills operating on non-dedicated A.C.
  5. Typically it can be identified and tracked using an ohmmeter.

If the units A.C. Corrective Action If the error message is consistently displayed when the unit is powered up, the upper PCA should be replaced. Please try the request again. Precor Error 82 The lift motor potentiometer is bad.

This is definitely true if the Error 42 occurred while the lift was within its normal physical range. Precor Error 15 Error 42 is displayed when the lift position reported by ... Possible Remedies 1. http://www.fixya.com/search/p1141705-precor_efx_546i_elliptical_version_4/error_42 Question about Precor Elliptical Trainers 1 Answer I can't get a straight answer on how to reset my ...42 Precor Error Code 42 Error Code: 42 Manufacturer: Precor Model: All Models

Blessing. Precor Error 22 Swap the lower PCA with a known good lower PCA to verify if the lower PCA is bad. You may NOT copy or distribute the content that appears on this site without written permission from Fixya Ltd. © 2005-2015, Fixya, Ltd. Include an image.

Precor Error 15

The lower PCA is bad. solution? Precor Treadmill Error Codes BailynA New System of Alternating Current Motors and Transformersby Nikola Tesla Are you sure?This action might not be possible to undo. Precor Treadmill Error 29 The lower PCA is bad.

Call Precor with your model # and S/N and they can tell you exactly. click site Precor 935 Premium Series... 3 Answers Precor M9.21 Treadmill - Stops under load Precor 9.21 Treadmill 4 Answers My Precor 9.35 treadmill keeps shutting off. Level 3 Expert 5327 Answers kakima Level 3 Expert 93922 Answers The Knight Level 3 Expert 66499 Answers Are you a Precor Treadmill Expert? Error 42 is displayed when the lift position reported by the lift position potentiometer is found to be outside its set limits. Precor Error 40

Check continuity of the interconnect cable or swap with a known good interconnect cable to verify if cable is bad. Simply recalibrating the lift motor will not solve the problem.] If the lift calibration number is not 0 or 255 and does not change when the lift motor turns, replace the Feb 06, 2014 | Precor Treadmills 1 Answer Precor Treadmill C956 error 21 Precor Error Code 21 Error Code: 21 Manufacturer: Precor Model: All Models Error Description: Error 21, Too many news Thanks Jen Precor Error Code 42 Error Code: 42 Manufacturer: Precor Model: All Models Error Description: Error 42, Lift Position Value Out of Range.

If an Error 42 has occurred, it is important to know the physical position of the lift when the error occurred. Precor Treadmill Error Code 82 Click "Add" to insert your video. The lift motor requires calibration.

Check continuity of the interconnect cable or swap with a known good interconnect cable to verify if cable is bad.

Step 2: Please assign your manual to a product: About Advertising About Us Blog Careers News & Media Help Contact FAQ Partners Privacy Policy Terms Community Forums Recent Q&A Top Experts Swap the lower PCA with a known good lower PCA to verify if the lower PCA is bad. or it's affiliates. Precor Lower Pca A lift calibration number of 0 or 255 indicates an open or shorted potentiometer connection.

AC input voltage is incorrect. 2. Rafael Andrade/Demand Media Step 3Press the up or down arrows to scroll through the error codes, if necessary for club or personal logging purposes. Swap the upper PCA with a know good upper PCA to verify if the upper PCA is bad. More about the author This means the problem could be anywhere between the lift motor and the upper PCA.

Capacitor can also fail in the open condition which would result with the lift motor trying to run but not having normal power. Investigate for cause and correct. God bless you Error 05, Key Depressed at Power Up Posted on Dec 12, 2012 Helpful 0 Not Helpful Flag You can't post conmments that contain an email address. × Comment Swap the lower PCA with a known good lower PCA to verify if the lower PCA is bad.

A lift calibration number of 0 or 255 indicates an open or shorted potentiometer connection. Recommended Action: Intermittent connections can be difficult to locate. In this case, the Error 42 is a secondary symptom and the issue should be approached as an Error 40. Precor Error Code 21 Dec 08, 2013 | Precor C956 Treadmill with Cardio Theater... 1 Answer Our precor elipitical is stuck at the top Error 42 Precor Error Code 42 Error

Swap the upper PCA with a know good upper PCA to verify if the upper PCA is bad. Investigate for cause and correct. Error 42 is displayed when the lift position reported by the lift position potentiometer is found to be outside its set limits. Get to Know Us About SPORTSMITH Blog Careers Site Map Helpful Links Like us on Facebook Follow us on Twitter Add us on Google+ Customer Support Contact Us Customer Support Center

Error 42 is displayed when the lift position reported by the lift ... Edit Close Save changes Attachments: Added items Uploading: 0% my-video-file.mp4 Complete. Simply recalibrating the lift motor will not solve the problem.] If the lift calibration number is not 0 or 255 and does not change when the lift motor turns, replace the Check continuity of the interconnect cable or swap with a known good interconnect cable to verify if cable is bad.

Please try the request again. Please enter a valid email address. precor c956i error codes error code 255 precor treadmill error 42 positive number definition physical change definition definition pre approaching definition investigate definition precor treadmill error 40 Related Topics: Precor C956i The upper PCA is bad.

Lift Position Value Out of Range Precor Error 42 Lift Position Value Out of Range Precor Error 42 sportsmith.net If you ve seen an error 42 displayed...