Solved RAID 1 Array failing - causing system reboots? Is it likely that this drive is faulty and it just isn't appearing in the diagnostics? Also, if it is consistantly occuring even during a clean reboot; you should check the firmware and driver of the array controller and apply updates Go to Solution 3 Comments The raid should then rebuild the disk automatically, but you can check within Insight Manager (if you use it) for the progress of the disks rebuild 0 Mace http://bsdupdates.com/post-error/post-error-1792-drive-array-reports.php
If that's the case with the RAID 5 then no, there's no risk. No data has been lost. Of course this ultimately, 2 or 3 years later, led to 2 drives in a RAID 5 array failing forcing a restore from tape with a loss of about 1 days Logical drive number 1 on the array controller in Slot 0 has a new status of 5. (Logical Drive status values: 1=other, 2=ok, 3=failed, 4=unconfigured, 5=recovering, 6=readyForRebuild, 7=rebuilding, 8=wrongDrive, 9=badConnect, 10=overheating,
All rights reserved. IML logs: Operating system failure (BugChek, STOP: 0x00000003, 0x8507F8B0, 0x8507F9FC, 0x821E5DC0) Post error: 1792-drive array reports valid data found in array accelerator Please if some one has the solution Justin2100 wrote: Scott Alan Miller wrote: Justin2100 wrote: What if I just remove the drive? That will be the same as if it completely died. Not what you want in Especially likely if bad drive #1 fails and 2 and 3 have to do ALL the work. 0 Serrano OP Justin2100 Jul 21, 2010 at 11:12 UTC Luckily,
Our plan is the upgrade the firmware and drivers during our scheduled PSP Update to version 8.4 next month, now that firmware and drivers are both included in the PSPs. you are over 3 yeard behind...this will improve monitoring,stability on the drivesNext, update driver and software for the storage subsystem (controller driver and ACU version) for better recognition of the new The server is running Windows Small Business Server 2003.Can anyone please explain me why the POST error?Regards,Edgar Santos Regards,Edgar Santos IML.png 116 KB Smart array.png 113 KB ACU.png 102 KB 0 https://community.hpe.com/t5/ProLiant-Servers-ML-DL-SL/POST-Error-1792-Drive-Array-Reports-Valid-Data-Found-in-Array/td-p/4118034 We explain the basics for creating useful threat intelligence.
Open Source Communities Comments Helpful Follow Getting POST error "POST Error: 1792-Drive Array Reports Valid Data Found in Array Accelerator" Solution Unverified - Updated 2014-02-28T18:07:03+00:00 - English No translations currently exist. Go to Solution 3 Comments LVL 4 Overall: Level 4 Server Hardware 1 SBS 1 Message Expert Comment by:mavaks2010-10-29 The SNMP TRAP: 6027 is a false error and is explained I'm not familiar with HP's RAID utility, but I wouldn't assume that it will see the new drive and put it into the array. what are you doing? You should not be posting again until the drive is on its way. Seriously, you are at risk right now.
Featured Post Find Ransomware Secrets With All-Source Analysis Promoted by Recorded Future Ransomware has become a major concern for organizations; its prevalence has grown due to past successes achieved by threat More Help Post Error - Message : 1792-Drive Array Reports Valid Data Found in Array Accelerator - Error : 92 Post Error - Message : 1778-Drive Array Resuming Automatic Data Recovery Process - Maybe the question we need to ask is What drives are in what RAID arrays? TECHNOLOGY IN THIS DISCUSSION Join the Community!
If the drive fault LED is not flashing and the operating system supports HP Insight Diagnostics, version 7.40 or later ("HP Insight Diagnostics" on page 75), perform the following: a. Screen shot enclosed.What has to be done?Kind regards,Arthur Heller/Atos Origin/Vienna. 296935.pdf 85 KB 0 Kudos Reply All Forum Topics Previous Topic Next Topic 4 REPLIES Víctor Cespón Honored Contributor [Founder] Options It's going to start to rebuild.
All rights reserved. I called hp and after diagnose they replaced the memories and system board. Perform orderly system shutdowns to avoid leaving data in the array accelerator.1792 Error Message Error Message: 1792-Drive Array Reports Valid Data Found in Array Accelerator......Data will automatically be written to drive Showing results for Search instead for Do you mean Menu Categories Solutions IT Transformation Internet of Things Topics Big Data Cloud Security Infrastructure Strategy and Technology Products Cloud Integrated Systems Networking
I installed them a few months ago and setup the 2nd datastore on my ESXi server but I have not placed any VMs or data at all on these drives. Join Now Hello - Today, I noticed there was an amber light on disk 6 of my 8 disk chassis for an HP DL380 G5 server. Any help is appreciated. 0 Question by:kopite47 Facebook Twitter LinkedIn Google LVL 9 Best Solution byvanbarsoun I would update RAID driver and firmware. You may get a better answer to your question by starting a new discussion.
Log Out Select Your Language English español Deutsch italiano 한국어 français 日本語 português 中文 (中国) русский Customer Portal Products & Services Tools Security Community Infrastructure and Management Cloud Computing Storage JBoss Register If you are a new customer, register now for access to product evaluations and purchasing capabilities.