Home > Lens Error > Powershot A540 Lens Error

Powershot A540 Lens Error

Contents

I didn't want to give up on the camera for it was a gift for my birthday.Thank you very much! If the picture is fine, then suspect the problem is with the LCD ribbon cable connection. March 23, 2008 at 11:07 AM Anonymous said... Particularly I do not recommend probing deeply around the most outer (largest) lens barrel gap, as you may dislodge the lens barrel dust gasket that's located just inside of that gap. have a peek at these guys

AND WHILE THIS PAGE WAS LOADING, I FORCED THE LENS IN. Ensure lens mechanism is clear of dirt/sand/etc... Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Or the camera's been dropped with the lens extended. http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

Lens Error Restart Camera

it now angles downwards and wouldnt retract, plus the camera freezes with the samsung logo when turned on. ive tried all of your tips but nothing has worked.i have a casio ex-z75 that just stopped working, when i turn it on the lens comes out and it makes a Then I turned it on, then off, and it closed when I turned it off.

I forced the lens in, and now when I turn the camera on it makes a buzzing and clickin sound, and what i see through the camera is very blurry. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens Maybe that will let you get under whatever gigantic clod of grit is wedging the lens tight. How To Restart Canon Camera I did everything up to the tapping step, which worked, however, when the lens finally opened I had no picture, it was just white.

I never would have tried this!!! Canon Camera Lens Error Will Shutdown Automatically Thank you so much. ty...

Nevermind, fixed my Kodak Easyshare C613.

camera lens canon powershot 8 Questions View all pragathi Rep: 373 2 2 1 Posted: 07/21/2010 Options Permalink History Subscribe Unsubscribe How do I fix my disconnected lens? I Dropped My Camera And The Lens Is Stuck When I turn it on the lens come out the lens error message shows and the camera shuts off. Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. patience is needed, and sometimes i can't do it unless i'm sitting on a desk with a flat surface.

  1. CR February 25, 2008 at 5:56 PM Anonymous said...
  2. Do you know how much they charge to fix it cause they wont tell me without me paying £20 just to look at it.
  3. juan de dios Zegarra 94.158 προβολές 8:54 Repair or Rebuild a Canon Powershot SX10 SX20 SX1 lens - Διάρκεια: 14:12.
  4. April 24, 2008 at 8:09 PM Camera Repair said...
  5. It might just be i really messed up my camera but i tried ALLL of the ways and nothing worked...
  6. Other variations include hitting a side of the camera against the palm of your hand.
  7. In other words, try this if there's no obvious mechanical damage to the lens barrels that's causing the problem.

Canon Camera Lens Error Will Shutdown Automatically

Search Engine Use the below search engine to narrow your search within the blog. Jiggle the ribbon cable, put in the batteries and see if the LCD works properly. Lens Error Restart Camera I could've used the other cotton bud and lightly soaped water. Camera Lens Won't Retract I thought the camera was a goner after the store said it wasn't worth repairing and it was past the extended warranty on it.

The error is affective for cameras with the serial number starting with the number “29” through “41”. http://bsdupdates.com/lens-error/powershot-tx1-lens-error.php asked 5 years ago viewed 94270 times active 8 months ago Get the weekly newsletter! Muhammad Agus Ismail 11.617 προβολές 10:37 Canon G7X vs S120 Which is The Best YouTube Vlogging Camera 2016 ? - Διάρκεια: 16:50. Brilliant site! Canon Ixus Lens Error Will Shutdown Automatically

Error E30 (for older Canon's) means that you don't have a memory card installed, so turn it off, slip in the SD card and turn it on one last time Fix Any advice? January 23 by John Gamble I used this trick, but rather than seeing a "gap," part of the edge of the lens was protruding by maybe 1 mm (i.e., the lens check my blog But when i press the shutter button, the camera will not take a picture.

PS3 DVD vs. Camera Lens Stuck It works fine now. What can I do to fix this?

oh yea, I also can't turn it off before it powers off.

Usually it's sand or grit interfering with the lens extension mechanism. But note that the fixes listed here will not work for everyone. Looked very bad for me.Then I found this posting. Canon Powershot A4000 Lens Error I gently pushed it to the side and it worked like a charm!!!

And I didn't get sand in it (as far as I know). I suspect a ribbon cable became dislodged or slightly disconnected from its connector. Realizing the camera was out of warranty, and the cost of repair would equal or exceed the price of the camera, I tried a desperation move. http://bsdupdates.com/lens-error/powershot-s3-is-lens-error.php Was this answer helpful?

The camera turned off with the lens still out and every time you turned it on it would just beep and you would be able to hear the cervo's trying to Have to say I was a bit apprehensive about putting force on the lens - actually had to apply quite a bit more than "very gently" to get the required result Linked 4 What should I do when I get “Lens Error Restart Camera”? 0 The lens is stuck, and error message is displayed for Canon A4000 IS 1 lens error-Canon PowerShot Here is what the lens error (E18 error on Canon) looks like.

but I'm just glad to have it back!UPDATE #2 - April 5, 2010 - I wrote this post back in 2007 and have actually switched this year over to using a Nikon Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. Good luck! Yes No Voted Undo Score 0 Cancel Add a comment 0/1024 Cancel Post comment Are you sure you want to delete this zzzzzz?

Please don't blame me if instead undesirable results occur. When I turned it on again I aimed toward the ceiling and snapped a picture really fast and it was fixed! Sometimes even machines need a little shake. =) April 11, 2008 at 3:47 PM Anonymous said... but pictures has clear horizontal lines.

But many people have reported success with these two methods by using what they considered excessive force. The spring wraps around the pivot post. Antsy permutations What's the difference between these two sentences? Just put up a new post today for that type of problem.